This text is replaced by the Flash movie.
This text is replaced by the Flash movie.
This text is replaced by the Flash movie.

 

Confirmed schedule as of February 27, 2010

  • Olds - June 19th

  • Drumheller - June 26th and 27th

  • Edson - July 9th and 10th

  • Vermilion - July 31st

  • Darwell - August 14th and 15th

 

SLED PULLING RULES General rules applies to all classes


-all competitors must arrive at least 2hr before event start time
-all competitors will display a positive and professional attitude towards event staff, volunteers, fans and fellow competitors.
Anyone who displays disorderly conduct will be given a verbal warning on the first incident and upon a second occurrence will be banned for the season
-any competitor caught cheating will be given a verbal warning and be disqualified from that event. Upon a second occurrence the competitor will be banned for the season
-the use of drugs and alcohol is prohibited while an event is in progress

All drivers must have the following
-approved helmet
-approved neck brace
-functional seat belt to be worn at all times while competing
-full clothing ie long sleeved shirt, pants and closed foot wear
-hitch that meets specs listed below
-competitors competing in THREE or more events must have a fire jacket

All vehicles must meet the following
-a vehicle competing in THREE or more events must have drive line loops (one loop for every joint in drive line)
-all vehicles with upward exiting exhaust must have cross bolts min 7/16 or exhaust screens
-max frame height is 28" measured below drivers door
-max hitch height is 26" to center of hooking point, be solid shank and have a 3" opening for sled hook
-max 38" tire diameter
-truck boxes must be free of loose objects any thing in the box must be fastened to the frame of the vehicle. Slip tanks and tool boxes must be level with or below the box line
Slip tanks must be empty
-if ANY object becomes loose or thrown from a vehicle you are disqualified
-ONCE A VEHICLE IS INSPECTED IT MAY NOT LEAVE THE STAGING AREA

STREET STOCK
-MUST HAVE VALID INSURANCE AND REGISTRAITION
-MUST HAVE DOT APPROVED HIGHWAY USE TIRES
-8000LB WIEGHT LIMIT
-NO HANGING WIEGHTS
-AIR KITS ALLOWED
-EXHUAST MODS ALLOWED
-NO FUELING UPGRADES PERMITED
-MUST MAINTAIN 1.5" VISIBLE SUSPENSION TRAVEL
(AIR BAGS WITH ONBOARD COMPRESSOR MUST BE DISCONECTED)
-IF VEHICLE SMOKES IT'S BUMPED A CLASS
-HITCH MUST BE MOUNTED IN FACTORY LOCATION

STREET WORK
- MUST HAVE VALID INSURANCE AND REGISTRAITION
- MUST HAVE DOT APPROVED HIGHWAY USE TIRES
- 8500LBS WEIGHT LIMIT
- 2.4" INDUCER LIMIT
- HANGING WEIGHTS ALLOWED AHEAD OF FRONT BUMPER ONLY NOT EXCEDDING 60" AHEAD OF CENTER LINE OF THE FRONT AXLE
- AIR KITS ALLOWED
- EXHAUST MODS ALLOWED
- FUELING UPGRADES ALLOWED
- AIR TO AIR INTERCOOLER ONLY
- MUST MAINTAIN 1.5" VISIBLE SUSPENSION TRAVEL
(AIR BAGS WITH ONBOARD COMPRESSOR MUST BE DISCONECTED)
-HITCH MUST BE MOUNTED IN FACTORY LOCATION

STREET MODIFIED
- MUST HAVE VALID INSURANCE AND REGISTRAITION
- MUST HAVE DOT APPROVED HIGHWAY USE TIRES
- 8500LBS WEIGHT LIMIT
- 2.6" INDUCER LIMIT
- HANGING WEIGHTS ALLOWED AHEAD OF FRONT BUMPER ONLY NOT EXCEDDING 60" AHEAD OF CENTER LINE OF THE FRONT AXLE
- AIR KITS ALLOWED
- EXHAUST MODS ALLOWED
- FUELING UPGRADES ALLOWED
- AIR TO AIR INTERCOOLER ONLY
- MUST MAINTAIN 1.5" VISIBLE SUSPENSION TRAVEL
(AIR BAGS WITH ONBOARD COMPRESSOR MUST BE DISCONECTED)
- HITCH MUST BE MOUNTED IN FACTORY LOCATION

SUPER MODIFIED
- PURPOSE BUILT VEHICLES ALLOWED
- SPECALITY TIRES ALLOWED
- 8500LBS WEIGHT LIMIT
- UNLIMITED INDUCER
- BREAK AWAY/ AIR SHUT OFFS ARE RECOMENDED (SHOULD) BE PRE- TURBO
- DRIVE LINE LOOPS MANDITORY NO 3 PULL GRACE
- FIRE JACKETS MANDITORY NO 3 PULL GRACE
- WATER INJECTION IS ALLOWED
- MINIMUM 44" FROM CENTER LINE OF REAR AXLE TO CENTER HITCH